2 Set your Crop-A-Dile to B-1. Side B is completely flat, and Side 1 has only a small nub to hold
the grommet in place.
3 Insert your grommet into the hole you punched.
4 S lide your Crop-A-Dile over the grommet, fitting the nub of Side 1 into the stem of the grommet.
5 Press down slowly on your Crop-A-Dile using medium pressure. If you press down too hard,
you’ll leave a significant indentation in your grommet image.
6 Your grommet is now set in your card stock.
note: You may see a slight indentation in the image, depending on how much
pressure you used to set the grommet.
No comments:
Post a Comment